Ang tanan nga mga Categories

Pag-ilis sa mga Insert

Naa ka diri :Balay> Product > Pag-ilis sa mga Insert

CCMT09T308-HM
CCMT09T308-HM
CCMT09T308-HM
Ang CVD Double Coated CCMT09T308-HM Carbide Turning inserts para sa Mild Steel
Ang CVD Double Coated CCMT09T308-HM Carbide Turning inserts para sa Mild Steel
Ang CVD Double Coated CCMT09T308-HM Carbide Turning inserts para sa Mild Steel

Ang CVD Double Coated CCMT09T308-HM Carbide Turning inserts para sa Mild Steel


Item:

CCMT09T308-HM

Kolor sa:

Bulawan/Doble nga kolor

Materyal nga:

Kwaresma sa Tungsten

Workpiece:

P/K/M

Grade:

XH7228/XH7229/

XH7230

Taklap, sapaw:

CVD extension

MOQ:

20Pcs

Presyo:

Negosasyon

Brand Ngalan:

LIFA

Kasagaran:

HRA91-93

certification:

ISO9001: 2008

Paggamit:

Nituyok

Orihinal nga Dapit:

Zhuzhou, China

Tag-iya:

Pagliko sa Holder/Lathe Holder

Petsa sa Pagpadala:

Anaa ang stock

inquiry
Description
11


Taas nga kinabuhi:

due to use of high quality raw material and advanced technology in




Taas nga produktibo:

due to its high hardness, the insert has good cutting performance, can work at higher speeds with less power consumption;


22


33


Taas nga katukma:

the insert has a small clearance between the cutting edge and bore hole, so it can increase the accuracy of machining process;Low vibration and noise during operation.

paghingalan, pagtinagsa

spe

Type

nga kabahin

Cermet   Grade
ISO
L
IC
S
D
R
XH7228XH7230
CCMT
060204-HM6.4
6.351
2.38
2.8
0.4

060208-HM6.4
6.3512.382.8
0.4

09T304-HM9.7
9.525
3.97
4.4
0.4

09T308-HM9.7
9.5253.97
4.4
0.4

120404-HM12.9
12.7
4.76
5.56
0.4

120408-HM12.9
12.74.76
5.56
0.8

aplikasyon

To prevent insert waste and easily detect wear, the gold-colored TiN outer layer of the Dragonskin multilayer CVD Ti(C,N)/Al2O3/TiN coating from cutting tool. It not only enables users to clearly identify insert wear and index before a breakage, but also prevents sharp cutting edges from going unused and the insert being inadvertently discarded.

Ang ISO-P steels mao ang pinakadako nga grupo sa materyal sa part machining, ug naglakip sa mga materyales gikan sa ductile, low-carbon steels ngadto sa high-alloy steel nga mga grado. Gidugang niini ang mga pagbag-o sa katig-a, mga tipo sa aplikasyon ug mga kondisyon sa makina sa panahon sa operasyon sa pagliko. Aron sa paghimo sa pagpili sa usa ka tukma nga indexable insert grado mas sayon.

The cutting characteristics of most turning applications are similar. For a given surface only one cutting tool is used. This tool must overhang its holder to some extent to enable the holder to clear the rotating workpiece. Once the cut starts, the tool and the workpiece are usually in contact until the surface is completely generated. During this time the cutting speed and cut dimensions will be constant when a cylindrical surface is being turned. In the case of facing operations the cutting speed is proportional to the work diameter, the speed decreasing as the center of the piece is approached. Sometimes a spindle speed changing mechanism is provided to increase the rotating speed of the workpiece as the tool moves to the center of the part.

drowing
3
5
11
INQUIRY

Mainit nga mga kategorya